Here you will install the clear side vent cover. The vent is used to provide ventilation for the power supply and as a exhaust vent for the enclosure as a whole.

Attach Side Vent Cover

Attach the side vent cover to the side of the enclosure that has the power supply.

Secure with #6-32 x 3/4" machine screws, lock washers, and hex nuts.

The lower mounting screws can be hard to reach.  Try holding a hex nut with some needle nose pliers while you drive the screw with a screwdriver.

Attach Vent Grill

Attach the 80mm vent grill to the cover and secure with 4, 6-32 x 1/2" machine screws.

The vent grill can be found on this page:

Additional Components