Book 2 in the KRmf70 series is now available.
Water Cooled Spindle Closed System - First Pass
This is my first pass at a closed water system for my water cooled spindle.
80mm AirExchanger Now Available
We now have an AirExchanger available for 80mm spindles.
VFD Spindle Introduction
An introduction to a VFD controled Spindle.
Build a CNC Controller Enclosure
I have to build at least 10 of these controller enclosures using various controllers.
I have provided drawing files and 100s of pictures so you can use the information to build your own.
Make a Simple Christmas Tree
Make a simple wooden Christmas tree for the little ones.
KReduCNC Electronics
In this Servo magazine article I cover the electronics.
CNCRouterParts Spindle/Router Mounts
Here is how you can use the CNCRouterParts Spindle/Router Mounts on your KRMx02.
SheetCam for CNC Router Tutorial
Here I show you how to setup and use SheetCam with your KRMx02
Build the Halloween Napkin Holder
This is a great little CNC project that is both easy and a lot of fun to build.
Downdraft Work Table
This is a great little downdraft table for cutting, sanding, and grinding.
Because it vents outside, I can cut and weld galvanized materials.
Making an Eccentric Bushing
Here I show you how I use my minilathe and a 4-jaw chuck to make eccentric bushings.
Setting Up a 4-Jaw Chuck
Here, I show you the easy way of setting up a independent 4-jaw chuck.
Hypertherm Powermax 65 Plasma Cutter Unboxing and Review
The unboxing and setup of the Hypertherm Powermax 65 plasma cutter.
Everlast 50s Plasma Cutter Unboxing and Review
I take you through the unboxing and setup of the Everlast 50s powerplasma.