This is a burn-in test of an early 18" x 14" KRMx02 build.
Making some aluminum parts on the KRMx02 CNC.
Just added a chip blower to my KRMx02.
I created a swarf shield for milling aluminum on my KRMx02 CNC.
Started a new section on the website called:
Working With Aluminum
Book 2 in the KRmf70 series is now available.
This is my first pass at a closed water system for my water cooled spindle.
We now have an AirExchanger available for 80mm spindles.
An introduction to a VFD controled Spindle.
I have to build at least 10 of these controller enclosures using various controllers.
I have provided drawing files and 100s of pictures so you can use the information to build your own.
Make a simple wooden Christmas tree for the little ones.
In this Servo magazine article I cover the electronics.
Here is how you can use the CNCRouterParts Spindle/Router Mounts on your KRMx02.
Here I show you how to setup and use SheetCam with your KRMx02
This is a great little CNC project that is both easy and a lot of fun to build.