Testing my first pass at a magnetic dust shroud for the CNC Construction Set.
I needed some small clamp bushings for one of the tables I use on the CNC Construction Set.
Build a Stepper Motor Tester.
Here I build a Steel 22Ga box using the same teqniqes I used on the Sintra box.
Here I show you how to build this cool little project box.
Add 219 more steps per inch to your X, Y, and A axis.
It's time to test the CNC Construction Set plasma cutter.
I cutout the parts for this cool little project enclosure using the plasma cutter.
Use the UC100 motion controller instead of a parallel port on you KRmf70 build.
Dont have a parallel port, use the UC100 motion controller instead.
In this series I show you how to build your own pen holder.
Started some testing of the UC300ETH Motion controller.
Lets take a look at the UCCNC software.
We have added several updates to the KReduCNC build.
I started research into building an MQL system.