Check out this workflow I use to make small parts out of PVC.
Advent Calendar CNC Project
CNC Construction Set - Dust Shroud Testing
Testing my first pass at a magnetic dust shroud for the CNC Construction Set.
CNC Construction Set - First Cuts
I needed some small clamp bushings for one of the tables I use on the CNC Construction Set.
DIY Stepper Motor Tester
Build a Stepper Motor Tester.
Build a Steel Plasma Cut Project Box
Here I build a Steel 22Ga box using the same teqniqes I used on the Sintra box.
Building a Sintra Project Box Using the KRMx02
Here I show you how to build this cool little project box.
Upgrade the KRMx02 Stepper Pulley
Add 219 more steps per inch to your X, Y, and A axis.
Bent Steel Project Box
It's time to test the CNC Construction Set plasma cutter.
I cutout the parts for this cool little project enclosure using the plasma cutter.
KRmf70 and the UC100 Motion Controller
Use the UC100 motion controller instead of a parallel port on you KRmf70 build.
Step-by-step instructions
KRMx02 and the UC100 Motion Controller
Dont have a parallel port, use the UC100 motion controller instead.
Step-by-step instructions
DIY Multi Color Pen Plotter
In this series I show you how to build your own pen holder.
UC300ETH Motion Controller
Started some testing of the UC300ETH Motion controller.
UCCNC Software
Lets take a look at the UCCNC software.
KReduCNC Updates
We have added several updates to the KReduCNC build.