Harmonic Rotary Introduction

New series on harmonic rotary drive.

Z Axis Bearing Mount Brace

Add his brace to keep your Z axis bearing mount from dropping.

CNC Construction Set Cable Management

Let’s add some drive chain to the CNC Construction Set.

Mounting the Layout Board

Mount your electronic layout board to the side of your CNC Construction Set.

CNC Construction Set Accessory Brackets

Here I will show you how to add some accessory brackets to your CNC Construction Set.

CNC Constuction Set Plate Tests

Here I test the rigidity of various materials.

CNC Construction Set Router Tables

Check out some of the simple tables you can add to your CNC Construction Set.

CNC Construction Set Break-in

You can download the CNC Construction Set break-in files here.

Small Part Workflow

Check out this workflow I use to make small parts out of PVC.

Advent Calendar CNC Project

Advent Calendar project.

See it here:

https://www.kronosrobotics.com/advent/

CNC Construction Set - Dust Shroud Testing

I just finished my first pass at a dust shroud system for the square spindle mounted on my CNC Construction Set. I needed a little project so I chose a small 3" wood gear as a test.

Testing my first pass at a magnetic dust shroud for the CNC Construction Set.

CNC Construction Set - First Cuts

I needed to make some T-slot bushings for a table I have been experimenting with on the CNC Construction Set. These are being cut from some 3/16" very dense MDF type material. I also wanted to push the build a little so I started slow and worked my way up.

I needed some small clamp bushings for one of the tables I use on the CNC Construction Set.  

DIY Stepper Motor Tester

Build a Stepper Motor Tester.

Build a Steel Plasma Cut Project Box

Here I build a Steel 22Ga box using the same teqniqes I used on the Sintra box.

Building a Sintra Project Box Using the KRMx02

Here I show you how to build this cool little project box.