In this Servo magazine article I cover the electronics.
CNCRouterParts Spindle/Router Mounts
Here is how you can use the CNCRouterParts Spindle/Router Mounts on your KRMx02.
SheetCam for CNC Router Tutorial
Here I show you how to setup and use SheetCam with your KRMx02
Build the Halloween Napkin Holder
This is a great little CNC project that is both easy and a lot of fun to build.
Downdraft Work Table
This is a great little downdraft table for cutting, sanding, and grinding.
Because it vents outside, I can cut and weld galvanized materials.
Making an Eccentric Bushing
Here I show you how I use my minilathe and a 4-jaw chuck to make eccentric bushings.
Setting Up a 4-Jaw Chuck
Here, I show you the easy way of setting up a independent 4-jaw chuck.
Hypertherm Powermax 65 Plasma Cutter Unboxing and Review
The unboxing and setup of the Hypertherm Powermax 65 plasma cutter.
Everlast 50s Plasma Cutter Unboxing and Review
I take you through the unboxing and setup of the Everlast 50s powerplasma.
Tiki Torch Deck Mount CNC Project
Create a deck mount for your Tiki Torches.
Floating Head added to KRMx02 Plasma Cutter
A floating head upgrade is added to the KRMx02 Plasma cutter.
Clean-Out Drawers Added to Downdraft
Some clean-out drawers make retrieving small parts much easier.
Downdraft Table Tested
First KRMx02 CNC plasma project
Ductwork Added
Added the ductwork to my downdraft table.
Blower Added to Downdraft
Completed the next step in the KRMx02 plasma table experiments.
The blower is added to the downdraft.