A little workflow I wrote up on making parts in aluminum.
KRMx02 Tiny Build Burn-in
This is a burn-in test of an early 18" x 14" KRMx02 build.
KRMx02 Making a Part
Making some aluminum parts on the KRMx02 CNC.
KRMx02 Chip Blower
Just added a chip blower to my KRMx02.
KRMx02 Swarf Shield
I created a swarf shield for milling aluminum on my KRMx02 CNC.
Working with Aluminum
Started a new section on the website called:
Working With Aluminum
Upgrading the KRmf70 CNC
Book 2 in the KRmf70 series is now available.
Water Cooled Spindle Closed System - First Pass
This is my first pass at a closed water system for my water cooled spindle.
80mm AirExchanger Now Available
We now have an AirExchanger available for 80mm spindles.
VFD Spindle Introduction
An introduction to a VFD controled Spindle.
Build a CNC Controller Enclosure
I have to build at least 10 of these controller enclosures using various controllers.
I have provided drawing files and 100s of pictures so you can use the information to build your own.
Make a Simple Christmas Tree
Make a simple wooden Christmas tree for the little ones.
KReduCNC Electronics
In this Servo magazine article I cover the electronics.
CNCRouterParts Spindle/Router Mounts
Here is how you can use the CNCRouterParts Spindle/Router Mounts on your KRMx02.
SheetCam for CNC Router Tutorial
Here I show you how to setup and use SheetCam with your KRMx02